Skoda Octavia 1996 Service Manual page 118

26
------------ 26-6 ------------
Exhaust System
- Align front and rear silencers horizontally:
- The suspension bolt at the exhaust pipe
K
should be positioned parallel to the tunnel
bridge (dimension -X- identical on left and
right).
Note:
On models with separation point ⇒ page 26-4,
check horizontal position of rear silencer
additionally at tail pipe.
K - Position clamping sleeve with a distance of
about 5 mm at the relevant marking and
tighten in horizontal position evenly to 40 Nm.
Different markings apply depending on gearbox
version:
♦ Arrow 1 - models with automatic gearbox
♦ Arrow 2 - models with manual gearbox
The bolted connection of the clamping sleeve
should be facing forward.
Inspecting exhaust system for
leaks
- Start engine and run at idling speed.
- Close tail pipe for the duration of the leak
test (e.g. with cloth or plug).
- Inspect connection points at cylinder head/
exhaust manifold, exhaust manifold/catalytic
converter etc. for leaks by listening.
- Rectify any leaks found.
OCTAVIA
Edition 05.97
S00.5105.51.20