Skoda Octavia 1996 Service Manual page 114

26
¡ ¢
------------ ------------
Exhaust System
K Fig. 1 Installation position of hanger
The angled side -arrow- at the base of the
hanger points in direction of travel.
Removing and installing front
exhaust pipe
Special tools, testers and aids required
♦ Torque wrench 5...50 Nm
(e.g. V.A.G 1331)
Removing
Notes:
♦ Avoid large deflection of decoupling element,
max. 10°.
♦ Always replace self-locking nuts.
K - Unbolt protective cover -arrows-. Separate
connector for lambda probe.
- Unbolt heat shield at front.
- Slacken clamping sleeve.
- Unbolt front exhaust pipe from exhaust ma-
nifold.
- Swivel front exhaust pipe down 180° and take
off.
OCTAVIA
Edition 12.99
S00.5105.52.20