Table of Contents
Advertisement
D.DDRD, DP.DDRD
Program Example
(1) This program stores data by 10 words starting from D0 in CPU No.2 into W10 or later in host CPU when X0 turns on.
[Ladder Mode]
Caution
(1) Digit specification of bit device is possible for n,
or
, the following conditions must be met.
D1
S2
• Digits are specified by 16 bits (4 digits).
• The start bit device is multiples of 16 (10
(2) Execute this instruction after checking that the read target CPU is powered on. Not doing so may end up no processing.
(3) If changing a range of the device specified at setting data between after execution of the instruction and turn-on of the
completion device, data to be stored by system (completion status, completion device) cannot be stored normally.
702
[List Mode]
, and
. Note that when the digit specification of bit device is made to
D1
S2
)
.
H
Advertisement
Table of Contents
