Mitsubishi MELSEC-Q/L Programming Manual page 288

RFS, RFSP
Operation Error
(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
Error
code
4101 The points specified in n exceed those of the proximate I/O.
Program Example
(1) The following program refreshes X100 to X11F and Y200 to Y23F when M0 goes ON.
[Ladder Mode]
286
Error details
[List Mode]
Step
Q00J/
Q00/ QnH
Q01
Instruction Device
QnPH QnPRH QnU LCPU
––