Mitsubishi MELSEC-Q/L Programming Manual page 158

DELTA, DELTAP
Operation Error
(1) In the following case, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
Error
code
The specified direct access output number exceeds the CPU module
4101
output range.
Program Example
(1) The following program presets CH1 of the AD61 mounted at slot 0 of the main base unit, when X20 goes ON.
[Ladder Mode]
[List Mode]
Step Instruction
156
Error details
Stores preset value (0) at addresses 1 and 2
of the AD61 buffer memory.
Outputs the preset command.
Device
Q00J/
Q00/ QnH QnPH QnPRH
Q01
QnU LCPU