Table of Contents
Advertisement
Quick Links
MELSECNET/10
Network Module
A1SJ72QLP25, A1SJ72QLR25
Thank you for buying the Mitsubishi general-purpose programmable
logic controller MELSEC-QnA Series
Prior to use, please read both this manual and detailed manual
thoroughly and familiarize yourself with the product.
©2000 MITSUBISHI ELECTRIC CORPORATION
User's Manual
A1SJ72QBR15
MODEL A1SQ-NET10-R-U-JE
MODEL
CODE
IB(NA)-0800111-B(0605)MEE
(Hardware)
13JQ94
Advertisement
Table of Contents
Related Manuals for Mitsubishi MELSEC-QnA Series
Summary of Contents for Mitsubishi MELSEC-QnA Series
- Page 1 Network Module User's Manual (Hardware) A1SJ72QLP25, A1SJ72QLR25 A1SJ72QBR15 Thank you for buying the Mitsubishi general-purpose programmable logic controller MELSEC-QnA Series Prior to use, please read both this manual and detailed manual thoroughly and familiarize yourself with the product. MODEL A1SQ-NET10-R-U-JE...
- Page 2 SAFETY PRECAUTIONS (Always read before starting use.) Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The instructions given in this manual are concerned with this product. For the safety instructions of the programmable controller system, please read the CPU module user's manual.
- Page 3 [INSTALLATION PRECAUTIONS] CAUTION Do not directly touch the printed circuit board, the conducting parts and electronic parts of the module. It may cause damage or erroneous operation. Before handling the module, touch a grounded metal object to discharge the static electricity from the human body. Failure to do so may cause malfunction or failure of the module.
- Page 4 This manual confers no industrial property rights or any rights of any other kind, nor does it confer any patent licenses. Mitsubishi electric Corporation cannot be held responsible for any problems involving industrial property rights which may occur as a result of using the contents noted in this manual.
-
Page 5: Table Of Contents
CONTENTS 1. Overview ...................... 1 2. Performance Specifications................2 3. Handling....................... 4 3.1 Cable length restrictions between stations ..........4 4. The Name and Setting of Each Part ............. 5 5. Wiring......................9 6. External Dimensions .................. 10 6.1 A1SJ72QLP25..................10 6.2 A1SJ72QLR25 .................. - Page 6 MELSECNET/10 Network System Reference Manual Compliance with the EMC Directive and the Low Voltage Directive When incorporating the Mitsubishi PLC into other industrial machinery or equipment and keeping compliance with the EMC and low voltage directives, refer to Chapter 3 "EMC Directive and Low Voltage Instruction" of the User’s Manual (Hardware) for the CPU module used or the PLC CPU supplied with the base unit.
-
Page 7: Overview
A1SJ72QLR25 and A1SJ72QBR15 model MELSECNET/10 network modules (abbreviated as Network Modules) which are used to construct remote I/O systems on MELSEC-QnA series MELSECNET/10 network systems. (1) The use, cable used and installation position of the Network Modules are indicated on the following chart. -
Page 8: Performance Specifications
*2: Specialised training and specific tools are required to connect the connector to the optical-fiber cable; the connector itself is a custom product. Please contact your nearest Mitsubishi Electric System Service Corporation when purchasing these items. For general specifications of the network module, refer to the user's manual for the PLC CPU... - Page 9 (2) A1SJ72QLR25, A1SJ72QBR15 Specifications Item A1SJ72QLR25 A1SJ72QBR15 Maximum link 8192 points points per 8192 points network 8192 points Maximum link points per Remote master station remote I/O station station + (2 W) <1600 bytes Remote I/O station remote master station X +B <1600 bytes + (2 W)
-
Page 10: Handling
3. Handling [INSTALLATION PRECAUTIONS] CAUTION Use the PLC in an environment that meets the general specificaitons contained in CPU module user’s manual. Using this PLC in an environment outside the range of the general specifications could result in electric shock, fire, erroneous operation, and damage to or deterioration of the product. -
Page 11: The Name And Setting Of Each Part
4. The Name and Setting of Each Part Indicates the name and setting of each part of Network Modules. A1SJ72QLP25 A1SJ72QLR25 1SJ72QLP25 1SJ72QLR25 OVER OVER HOLD AB.IF HOLD AB.IF DUAL RMT.E. TIME DUAL RMT.E. TIME D.LINK SW.E. DATA D.LINK SW.E. DATA T.PASS ST.E. - Page 12 Name Contents Name Status Contents Normally operating. The position of switch for WDT error occurred (hardware A1SJ72QLP25 the display failure) switch over of A1SJ72QLR25 DUAL Multiplex transfer in execution 5) is valid (OFF: Multiplex transfer not when it is on executed) the left side.
- Page 13 Name Contents Name Status Contents AB.IF Consecutive 1s exceeding the specified number were received. Length of received data is too short. <Cause> Timing at which station sending data to target station is disconnected from network, too short monitoring time, cable fault, noise, etc. TIME Token has not reached host within monitoring time.
- Page 14 Name Contents 5) Switch for mode switch Switch over of forward/reverse loop of the error display of CRC to over UNDER and the display switch over of RUN to F.E./PW to R.E. (factory setting at the time of shipping: left side) Switch position Contents L(F.L.)
- Page 15 *1: When the setting is changed while the power supply is ON, reset using the reset switch in *2: The setting range for the A1SJ72QBR15 is shown below. <Setting range> 1 to 32: Station number Other than 1 to 32: Setting error (The SW.E. LED turns ON. Note that it does not turn ON when set to any of 33 to 64.)
-
Page 16: Wiring
5. Wiring DANGER Before installation or wiring, be sure to shut off all phases of the external power supply used by the system. Failure to do so may cause electric shocks or damage the product. CAUTION Solder the coaxial cable connector properly. Incomplete soldering may cause a malfunction. -
Page 17: External Dimensions
STATION Setting MODE MODE 0:ONLINE(A.R.) 2:OFFLINE FRONT SIDE 13 10 (0.51)(0.39) 93.6 (3.96) 54.5 (2.15) Unit: mm (in.) *1: Please confirm details to Mitsubishi Electric System Service Corporation. 6.2 A1SJ72QLR25 1SJ72QLR25 OVER HOLD AB.IF DUAL RMT.E. TIME D.LINK D.LINK SW.E. -
Page 18: A1Sj72Qbr15
6.3 A1SJ72QBR15 1SJ72QBR15 OVER HOLD AB.IF RMT.E. TIME D.LINK SW.E. DATA T.PASS ST.E. UNDER WAIT PRM.E DISPLAY RESET STATION Setting MODE MODE 0:ONLINE(A.R.) 2:OFFLINE [50] (1.97) At the time of installation of F-type connector 12.3 (0.48) 93.6 (3.96) 54.5 (2.15) (0.31) Unit: mm (in.) - Page 19 MEMO...
- Page 20 Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi; machine damage or lost profits caused by faults in the Mitsubishi products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi;...