Mitsubishi MELSEC-Q/L Programming Manual page 620

UNIRD, UNIRDP
7.18.9 UNIRD, UNIRDP Reading module information
7.18.9
UNIRD, UNIRDP
UNIRD
UNIRDP
n1 : Value obtained by dividing the head I/O number of the reading module information source by 16 (0 to FFn) (BIN 16 bits)
: Head number of the devices where the module information will be stored (device name)
D
n2 : The number of points of read data (0 to 256) (BIN 16 bits)
Internal Devices
Setting
Data
Bit Word
n1
––
D
n2
Function
(1) Reads the module information as much as designated by n2 from the module designated by n1, and stores that
information into the area starting from the device designated by
(Reads the status of the actually installed modules even if the module type and the number of points are changed by I/O
assignment.)
Remark
The value of n1 is specified by the first 3 digits of the hexadecimal 4 digits that represent the head I/O number of the
module from which the module information is read.
QCPU
Power
supply
CPU
module
LCPU
CPU module
(L26CPU-BT)
Power
supply CPU
module
618
Command
Command
J
R, ZR
Bit
Q68
QX10 QX10 QX10 QX10
ADV
0000 0010 0020 0030 0040
H H H H
Built-in Built-in LX40 LX40 LX40
I/0 CC-Link C6 C6 C6
0000 0010 0030 0040 0050
H H H H
High
Basic
performance
UNIRD n1
UNIRDP n1
\
U \G
Word
––
––
––
.
D
QY41
QY10 QY10
P
Head I/O number configured in
0050 0070 0080
H H H H
the I/O assignment setting
Specify K4 or H4 as the head I/O number to be read.
L60 LY41 LY10 LY10 LY10
AD4 NT1P R2 R2 R2
0060 0070 0090 00A0 00B0
H H H H H
Specify K6 or H6 as the head I/O number to be read.
Process Redundant Universal LCPU
D n2
D n2
Constants
Zn Other
K, H
––
–– ––
––
Head I/O number configured in th
H
I/O assignment setting