Table of Contents
Advertisement
END
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into
SD0.
Error
code
The END instruction was executed before the execution of the NEXT
4200
instruction and after the execution of the FOR instruction.
The END instruction was executed before the execution of the RET
4211
instruction and after the execution of the CALL, FCALL, ECALL, or
EFCALL instruction.
The END instruction was executed before the execution of the IRET
4221
instruction in an interrupt program.
The END instruction was executed between the CHKCIR to CHKEND
4230
instructions.
The END instruction was executed between the IX to IXEND
4231
instructions.
166
Error details
Q00J/
Q00/
QnH
QnPH QnPRH
Q01
QnU
LCPU
Advertisement
Table of Contents
