Mitsubishi MELSEC-Q/L Programming Manual page 142

OUT
(2) When bit designation has been made for word device
[Ladder Mode]
b15
D0
Remark
The number of basic steps for the OUT instructions is as follows:
• When using internal device or file register (R): 1
• When using direct access output (DY): 2
• When using serial number access format file register
(Only for Universal model QCPU and LCPU): 2
(Basic Model QCPU, High Performance model QCPU, Process CPU, and Redundant CPU): 3
• Devices other than above: 3
140
[List Mode]
Step
b7 b6 b5 b0
Instruction Device