4.9.5.5
Lease Entry
To access this page, click Management > DHCP Server > Lease Entry.
Figure 4.98 Management > DHCP Server > Lease Entry
The ensuing table for Lease entry Table settings are informational only: IP Address,
Client Mac, Start Time, End Time and Type.
4.9.6
SMTP Client
Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail messages
between servers. SMTP is used to send messages from a mail client to a mail server.
SMTP by default uses TCP port 25.
4.9.6.1
Global Settings
The Global Settings page allows you to set the active profile for the SMTP client.
To access this page, click Management > SMTP Client > Global Settings.
Figure 4.99 Management > SMTP Client > Global Settings
The following table describes the items in the previous figure.
Item
Active Profile
Apply
The ensuing table for SMTP Information settings are informational only: Active Pro-
file Id.
4.9.6.2
Profile Settings
The Profile Settings page allows you to select the server IP, the server port, and
sender mail for the listed profile.
Description
Click the drop-down menu to select the profile status (None, 1 or 2).
Click Apply to save the values and update the screen.
102
EKI-7710 Series User Manual