Az Eee; Figure 4.28 L2 Switching > Garp > Gvrp Settings; Figure 4.29 L2 Switching > 802.3Az Eee - Advantech EKI-7710E-2C User Manual

Item
Leave All Time
Apply
The ensuing table for GARP Information settings are informational only: Join Time,
Leave Time and Leave All Time.
4.5.6.2 GVRP Settings
The GVRP Settings page allows you to enable or disable the GVRP (GARP VLAN
Registration Protocol or Generic VLAN Registration Protocol) protocol which facili-
tates control of virtual local area networks (VLANs) within a larger network.
To access this page, click L2 Switching > GARP > GVRP Settings.
The following table describes the items in the previous figure.
Item
Status
Apply
The ensuing table for GVRP Information settings are informational only: GVRP.
4.5.7

802.3az EEE

The 802.3az Energy Efficient Ethernet (EEE) innovative green feature reduces
energy consumption through intelligent functionality:
Traffic detection — Energy Efficient Ethernet (EEE) compliance

Inactive link detection

Inactive link detection function automatically reduces power usage when inactive
links or devices are detected.
To access this page, click L2 Switching > 802.3az EEE.
EKI-7710 Series User Manual
Description
Enter a value to specify the Leave All Time controls how frequently
Leave All PDUs are generated. A LeaveAll PDU indicates that all reg-
istrations will shortly be deregistered. Participants will need to rejoin in
order to maintain registration. The Leave All Period Timer is set to a
random value in the range of LeaveAllTime to 1.5*LeaveAllTime. The
timer is specified in centiseconds. Enter a number between 12 and
12000. An instance of this timer exists for each GARP participant for
each port.
Click Apply to save the values and update the screen.
Figure 4.28 L2 Switching > GARP > GVRP Settings
Description
Click to enable or disable the GARP VLAN Registration Protocol
administrative mode for the switch. The factory default is Disable.
Click Apply to save the values and update the screen.
Figure 4.29 L2 Switching > 802.3az EEE
55