Smtp Client; Figure 4.120 Management > Smtp Client > Global Settings; Figure 4.121 Management > Smtp Client > Profile Settings > Profile Settings - Advantech EKI-7706 Series User Manual

The ensuing table for Lease entry Table lists the following settings (informational
only):
IP Address, Client Mac, Start Time, End Time and Type
4.9.5

SMTP Client

Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail messages
between servers. SMTP is used to send messages from a mail client to a mail server.
SMTP by default uses TCP port 25.
4.9.5.1 Global Settings
The Global Settings page allows you to set the active profile for the SMTP client.
To access this page, click Management > SMTP Client > Global Settings.
Figure 4.120 Management > SMTP Client > Global Settings
The following table describes the items in the previous figure.
Item
Active Profile
Apply
The ensuing table for SMTP Information lists the following settings (informational
only):
Active Profile Id
4.9.5.2 Profile Settings
The Profile Settings page allows you to select the server IP, the server port, and
sender mail for the listed profile.
To access this page, click Management > SMTP Client > Profile Settings.
Figure 4.121 Management > SMTP Client > Profile Settings > Profile Settings
The following table describes the items in the previous figure.
Item
Profile ID
Description
Click the drop-down menu to select the profile status (None, 1 or 2).
Click Apply to save the values and update the screen.
Description
Click the drop-down menu to select the identification type for the
profile (1 or 2).
116 EKI-7706 Series User Manual