Dynamic Forwarding Table; Security; Storm Control; Figure 4.54 Mac Address Table > Dynamic Forwarding Table - Advantech EKI-7710E-2C User Manual

4.6.3

Dynamic Forwarding Table

The Dynamic Forwarding function allows you to configure an address tables, which
contain the following:
l The port each hardware address is associated with
l The VLAN to show or clear dynamic MAC entries
l The MAC address selection
To access this page, click MAC Address Table > Dynamic Forwarding Table.
Figure 4.54 MAC Address Table > Dynamic Forwarding Table
The following table describes the items in the previous figure.
Item
Port
VLAN
MAC Address
View
Clear
The ensuing table for MAC Address Information settings are informational only:
MAC Address, VLAN, Type, Port and Add to Static MAC (click to add the MAC
address to static MAC address list).
4.7

Security

The Security function allows for the configuration of Storm Control, Port Security, Pro-
tected Ports, DoS Prevention, Applications, 802.1x, and IP Security.
4.7.1

Storm Control

The Storm Control page allows you to setup the units and Preamble/IFG to manage
the occurrence of packet flooding on the LAN and consequent traffic to prevent the
degrading of network performance.
EKI-7710 Series User Manual
Description
Click the drop-down menu to select the port number to show or clear
dynamic MAC entries. If a port, VLAN or MAC address is not selected
the whole dynamic MAC table is displayed or cleared.
Click the drop-down menu to select the VLAN to show or clear
dynamic MAC entries.
Enter the MAC address to show or clear dynamic MAC entries. If a
port, VLAN or MAC address is not selected the whole dynamic MAC
table is displayed or cleared.
Click View to display the MAC address information.
Click Clear to clear the MAC Address Information table.
71