Removing Sfp Modules; Figure 2.9 Removing A Fiber Optic Cable To A Transceiver; Figure 2.10 Removing An Sfp Transceiver - Advantech EKI-7710E-2C User Manual

2.4.2

Removing SFP Modules

To disconnect an LC connector, use the following guidelines:
1. Press down and hold the locking clips on the upper side of the optic cable.
2. Pull the optic cable out to release it from the transceiver.

Figure 2.9 Removing a Fiber Optic Cable to a Transceiver

3. Hold the handle on the transceiver and pull the transceiver out of the slot.
Replace the dust plug on the slot if you are not installing a transceiver.
Note!
The dust plug protects hardware from dust contamination.

Figure 2.10 Removing an SFP Transceiver

18
Handle
EKI-7710 Series User Manual