Smtp Client; Figure 4.116 Management > Smtp Client > Global Settings; Figure 4.117 Management > Smtp Client > Profile Settings > Profile Settings - Advantech EKI-7428 Series User Manual

4.9.6

SMTP Client

Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail messages
between servers. SMTP is used to send messages from a mail client to a mail server.
SMTP by default uses TCP port 25.
4.9.6.1 Global Settings
The Global Settings page allows you to set the active profile for the SMTP client.
To access this page, click Management > SMTP Client > Global Settings.
Figure 4.116 Management > SMTP Client > Global Settings
The following table describes the items in the previous figure.
Item
Active Profile
Apply
The ensuing table for SMTP Information settings are informational only: Active
Profile Id.
4.9.6.2 Profile Settings
The Profile Settings page allows you to select the server IP, the server port, and
sender mail for the listed profile.
To access this page, click Management > SMTP Client > Profile Settings.
Figure 4.117 Management > SMTP Client > Profile Settings > Profile Settings
The following table describes the items in the previous figure.
Item
Profile ID
Server IP
Server Port
Sender Mail
Apply
EKI-7428 Series User Manual
Description
Click the drop-down menu to select the profile status (None, 1 or 2).
Click Apply to save the values and update the screen.
Description
Click the drop-down menu to select the identification type for the
profile (1 or 2).
Enter the IP address to designate the server host.
Enter the port number to designate the port associated with the server
IP address.
Enter the email address of the sender client.
Click Apply to save the values and update the screen.
108