Smtp Client; Figure 4.198 Management > Dhcp Server > Client Mac Settings; Figure 4.199 Management > Dhcp Server > Lease Entry - Advantech EKI-7720 Series User Manual

4.9.5.5 Client MAC Settings
To access this page, click Management > DHCP Server > Client MAC Settings.
Figure 4.198 Management > DHCP Server > Client MAC Settings
The following table describes the items in the previous figure.
Item
Entry ID
Client MAC Address Enter the MAC address for DHCP server.
IP Address
Subnet Mask
Gateway
DNS
Apply
The ensuing table for Client MAC Information settings are informational only: Entry
ID, Client MAC Address, IP Address, Subnet Mask and Modify (Click Detail to dis-
play the detail information of desired entry id or Delete to delete the desired entry id).
4.9.5.6 Lease Entry
To access this page, click Management > DHCP Server > Lease Entry.
The following figure displays the Lease entry Table settings.
Figure 4.199 Management > DHCP Server > Lease Entry
4.9.6

SMTP Client

Simple Mail Transfer Protocol (SMTP) is a protocol to send e-mail messages
between servers. SMTP is used to send messages from a mail client to a mail server.
SMTP by default uses TCP port 25.
4.9.6.1 Global Settings
The Global Settings page allows you to set the active profile for the SMTP client.
EKI-7720 Series User Manual
Description
Type in the value designating the entry ID.
Enter a value to specify the IP address of the interface.
Enter a value to specify the IP subnet mask for the interface.
Enter a value to specify the gateway for the interface.
Enter a value to specify the DNS server for the interface.
Click Apply to save the values and update the screen.
125