Tftp Commands Set; Systemlog, Smtp And Event - Advantech EKI-6558TI User Manual

En50155 ip67 8-port m12 managed ethernet switch with wide temperature
Table of Contents

Advertisement

8021x portstate
[disable | reject | accept | authorize]
show 8021x
no 8021x
3.1.14

TFTP Commands Set

Table 3.15: TFTP Commands Set
Commands
backup flash:backup_cfg
restore flash:restore_cfg
upgrade flash:upgrade_fw
3.1.15

SystemLog, SMTP and Event

Table 3.16: SysLog,SMTP,Event Commands Set
Commands
systemlog ip
[IP address]
systemlog mode
[client|server|both]
show systemlog
show systemlog
no systemlog
smtp enable
smtp serverip
[IP address]
smtp authentication
smtp account
[account]
smtp password
[password]
smtp rcptemail
[Index] [Email address]
show smtp
no smtp
event device-cold-start
[Systemlog|SMTP|Both]
event authentication-failure
[Systemlog|SMTP|Both]
event X-ring-topology-change
[Systemlog|SMTP|Both]
event systemlog
[Link-UP|Link-Down|Both]
event smtp
[Link-UP|Link-Down|Both]
EKI-6558TI_EKI-6559TMI_Manual_ed2
global configuration command to
set the reauth period.
Use the 802.1x port state interface
configuration command to set the
I
state of the selected port.
Displays a summary of the 802.1x
E
properties and also the port sates.
Disable 802.1x function
G
Level
Description
Save configuration to TFTP and need
to specify the IP of TFTP server and
G
the file name of image.
Get configuration from TFTP server
and need to specify the IP of TFTP
G
server and the file name of image.
Upgrade firmware by TFTP and need
to specify the IP of TFTP server and
G
the file name of image.
Level
Description
Set System log server IP address.
G
Specified the log mode
G
Displays system log.
E
Show system log client & server
P
information
Disable systemlog functon
G
Enable SMTP function
G
Configure SMTP server IP
G
Enable SMTP authentication
G
Configure authentication account
G
Configure authentication password
G
Configure Rcpt e-mail Address
G
Show the information of SMTP
P
Disable SMTP function
G
Set cold start event type
G
Set Authentication failure event
G
type
Set X - ring topology changed
G
event type
Set port event for system log
I
Set port event for SMTP
I
36
switch(config)#interface fastethernet 3
switch(config-if)#8021x portstate accept
switch>show 8021x
switch(config)#no 8021x
Defaults Example
switch(config)#backup flash:backup_cfg
switch(config)#restore flash:restore_cfg
switch(config)#upgrade lash:upgrade_fw
Example
switch(config)# systemlog ip 192.168.1.100
switch(config)# systemlog mode both
Switch>show systemlog
switch#show systemlog
switch(config)#no systemlog
switch(config)#smtp enable
switch(config)#smtp serverip 192.168.1.5
switch(config)#smtp authentication
switch(config)#smtp account User
switch(config)#smtp password
switch(config)#smtp rcptemail 1
switch#show smtp
switch(config)#no smtp
switch(config)#event device-cold-start both
switch(config)#event authentication-failure both
switch(config)#event X-ring-topology-change both
switch(config)#interface fastethernet 3
switch(config-if)#event systemlog both
switch(config)#interface fastethernet 3
switch(config-if)#event smtp both
Alert@test.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eki-6559tmi

Table of Contents