Port Security; Figure 4.57 Security > Port Security - Advantech EKI-7710E-2C User Manual

The following table describes the items in the previous figure.
Item
Port
Port State
Action
Type Enable
Apply
The ensuing table for Storm Control Port Information settings are informational
only: Port, Port State, Broadcast (Kbps), Unknown Multicast (Kbps), Unknown Uni-
cast (Kbps) and Action.
4.7.2

Port Security

The Port Security page allows you to configure port isolation behavior.
To access this page, click Security > Port Security.
The following table describes the items in the previous figure.
Item
Port Select
Enabled
FDB Learn Limit
(0-64)
Violation MAC Notifi-
cation
Apply
The ensuing table for Port Security Information settings are informational only:
Port, Enabled, FDB Learn Limit and Violation MAC Notification.
EKI-7710 Series User Manual
Description
Enter the port number to designate the local port for the Storm Control
function.
Select Disabled or Enabled to define the port state
Click the drop-down menu to select the type of action to designate for
the selected port during a Storm Control incident. The options are
Drop and Shutdown.
Click the radio button to enable Broadcast, Unknown Multicast, or
Unknown Unicast.
 Broadcast: Select the variable in Kbps to define the broadcast
bandwidth.
Unknown Multicast: Select the variable in Kbps to define the

multicast setting.
 Broadcast: Select the variable in Kbps to define the unknown
unicast setting.
Click Apply to save the values and update the screen.
Figure 4.57 Security > Port Security
Description
Enter a single or multiple port numbers to configure.
Select Enabled or Disabled to define the selected Port.
Enter the variable (0 to 64) to set the learn limit for the FDB setting.
Select Enabled or Disabled to define the selected Port.
Click Apply to save the values and update the screen.
73