Table of Contents
Advertisement
Item
Privilege Type
Apply
The ensuing table for Local Users settings are informational only: User Name, Pass-
word Type, Privilege Type and Delete (click to delete the desired user account).
4.11.7
Reset System
To access this page, click Tools > Reset System.
Click Restore to have all configuration parameters reset to their factory default val-
ues. All changes that have been made will be lost, even if you have issued a save.
Reset settings take effect after a system reboot.
4.11.8
Reboot Device
To access this page, click Tools > Reboot Device.
Click Reboot to reboot the switch. Any configuration changes you have made since
the last time you issued a save will be lost.
4.12
Modbus/TCP Mapping
The data map addresses of Advantech switches shown in the following table start
from Modbus address 30001 for function code 4.
In the given example, the address offset 0x1000 (hex) equals Modbus address
34097, while the address offset 0x1100 (hex) equals Modbus address 34353.
The information given by the Advantech is shown in hex mode.
4.12.1
Modbus/TCP Mapping Table
Catelog
Name
System Info
Vendor ID =
0x'13FE
Unit ID = 0xFF 1 word 16 bits HEX
Product Code 1 word 16 bits HEX
EKI-7710 Series User Manual
Description
Click the drop-down menu to designate privilege authority for the user
entry: Admin or User.
Click Apply to create a new user account.
Data Type
Interpretation
1 word 16 bits HEX
117
Address
Address
Offset (Hex)
3X
0x0000
30001
Vendor ID = 0x13FE
0x0001
30002
Unit ID = 0xFF
0x0002
30003
Product Code
Description
Advertisement
Table of Contents
