Grounding The Device - Advantech EKI-7710E-2C User Manual

Do not bundle together wiring with similar electrical characteristics.

Make sure to separate input and output wiring.

Label all wiring and cabling to the various devices for more effective manage-

ment and servicing.
Routing communications and power wiring through the same conduit
Note!
may cause signal interference. To avoid interference and signal degra-
dation, route power and communications wires through separate con-
duits.
2.7.3

Grounding the Device

Warning! Do not disconnect modules or cabling unless the power is first switched
off.
The device only supports the voltage outlined in the type plate. Do not
use any other power components except those specifically designated
for the switch device.
Warning! Before connecting the device properly ground the device. Lack of a
proper grounding setup may result in a safety risk and could be hazard-
ous.
Warning! Do not service equipment or cables during periods of lightning activity.
Warning! Do not service any components unless qualified and authorized to do
so.
Warning! Do not block air ventilation holes.
22 EKI-7710 Series User Manual