Remove The Direct Connect Sata Cable; Install The Direct Connect Sata Cable - HPE ProLiant BL460c Gen10 User Manual

Remove the direct connect SATA cable

Prerequisites
To remove the direct connect SATA cable, you need a T-15 Torx screwdriver.
Procedure
1. Power down the server blade on page 21.
2. Remove the server blade on page 22.
3. Place the server blade on a flat, level work surface.
4. Remove the access panel on page 22.
5. Remove the direct connect SATA cable.

Install the direct connect SATA cable

Prerequisites
To install the direct connect SATA cable, you need a T-15 Torx screwdriver.
Procedure
1. Power down the server blade on page 21.
2. Remove the server blade on page 22.
3. Place the server blade on a flat, level work surface.
4. Remove the access panel on page 22.
5. Install the direct connect SATA cable.
2
1
5
4
3
Operations 31