Rmon > Rmon Basic Settings; Rmon > Rmon Ethernet Statistics Configuration; Rmon > Rmon History Control Configuration - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Select QoS Mode: Select PortBase, 802.1p, or DSCP.
Quening Mechanism:
Strict Priority: Selecting this will set the highest queue to be emptied first while the other queues
will follow the weighted round-robin scheduling scheme
WRR: Use the weighted round-robin (WRR) algorithm to handle packets in an even distribution in
priority classes of service.
Click Apply for the settings to take effect.
From Port / To Port: Select a range of ports to be configured.
Priority: Defines the priority assigned to the port. The priority range is between 0 and 7 with 0 being
assigned to the lowest priority and 7 assigned to the highest.
Click Apply for the settings to take effect.
RMON > RMON Basic Settings
You can enable and disable remote monitoring (RMON) status for the SNMP function on the Switch. In
addition, RMON Rising and Falling Alarm Traps can be enabled and disabled. Click Apply for the settings to
take effect.
RMON > RMON Ethernet Statistics Configuration
The RMON Statistics Configuration page displays the information of RMON Ethernet Statistics and allows
you to configure the settings.
The RMON Ethernet Statistics Configuration contains the following fields:
Index (1 - 65535): Enter the RMON Ethernet Statistics entry number.
Port: Enter the port from which the RMON information was taken.
Owner: Enter the RMON station or user that requested the RMON information.
Click Apply for the settings to take effect.
RMON > RMON History Control Configuration
The RMON History Control Configuration page contains information about samples of data taken from ports.
For example, the samples may include interface definitions or polling periods.
Figure 4.85 - RMON > RMON Basic Settings
Figure 4.86 - RMON > RMON Ethernet Statistics Configuration
5 5 4 4