Storage; Disposal Of The Machine; Ordering Codes - Kemppi Minarc Evo 180 Operating Manual

4.3

Storage

Store the unit in a clean and dry place. Shield it from rain, and in temperatures exceeding
+25 °C from direct exposure to sun.
4.4

Disposal of the machine

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, per the instructions of local authorities or a Kemppi representative. By
applying this European directive you will improve the environment and human health.
5.

ORDERING CODES

Minarc Evo 180 welding machine
Minarc Evo 180 welding machine (Denmark)
Minarc Evo 180VRD welding machine
Minarc Evo 180AU welding machine
(Australia, New Zealand)
Minarc Evo 140AU welding machine
(Australia, New Zealand)
Minarc Evo 180NP welding machine
Earth return cable and clamp
Welding cable and electrode holder
Carrying strap
Optional: TIG torch TTM15V
BETA 90 welding helmet
BETA 90X welding helmet
BETA 90 FreshAir with Flow Control pack
R10 hand held remote control
R10 hand held remote control
© Kemppi Oy / 1438
includes earth return and welding cables
includes earth return and welding cables
includes earth return and welding cables
includes earth return and welding cables
includes earth return and welding cables
includes earth return and welding cables
(does not include mains plug)
4 m
5 m
10 m
EN
61002180
61002180DK
61002180VRD
61002180AU
61002140AU
61002180NP
6184015
6184005
9592163
6271432
9873045
9873047
P1700
6185409
618540901
13