Disposal Of The Machine; Ordering Codes - Kemppi WFX 200 Operating Manual

6.

DISPOSAL OF THE MACHINE

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, as per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
7.

ORDERING CODES

WFX 200 wire feeder
WFX 300 wire feeder
WFX 200 P Fe wire feeder
EN
WFX 300 P Fe wire feeder
WFX 200 P Ss wire feeder
WFX 300 P Ss wire feeder
WFX 200 AMC wire feeder
WFX 300 AMC wire feeder
WFX 200-T wire feeder
WFX 300 P-T wire feeder
WFX 300-T wire feeder
Cables
Earth return cable
Earth return cable
MMA welding cable
MMA welding cable
Magnetic clamp (voltage sensing cable)
Magnetic clamp (earth return cable)
Interconnection cables, air-cooled
FASTMIG X 70-1.8-GH
FASTMIG X 70-5-GH
FASTMIG X 70-10-GH
FASTMIG X 70-20-GH
FASTMIG X 70-30-GH
– For other lengths, please contact Kemppi.
28
WFX 200, 300, 200 P Fe/Ss, 300 P Fe/Ss, 200-T, 300 P-T, 300-T, 200 AMC, 300 AMC
200 mm, regular pulse welding
300 mm, regular pulse welding
200 mm, pipe welding, steel
300 mm, pipe welding, steel
200 mm, pipe welding, stainless steel
300 mm, pipe welding, stainless steel
200 mm, intelligent pulse welding
300 mm, intelligent pulse welding
200 mm, tailored
300 mm, tailored
300 mm, tailored
5 m, 50 mm²
5 m, 70 mm²
5 m, 50 mm²
5 m, 70 mm²
200 A
600 A
1.8 m
5 m
10 m
20 m
30 m
6103520
6103530
6103521
6103531
6103522
6103532
6103523
6103533
6103524
6103535
6103534
6184511
6184711
6184501
6184701
9871580
9871570
6260468
6260469
6260470
6260471
6260472