Outputting System Information By Source Module; Default Output Rules Of System Information - HP A3100-8 v2 EI Configuration Manual

Table 5 Information channels and output destinations
Information
channel
number
0
1
2
3
4
5
6
7
8
9

Outputting system information by source module

The system is composed of a variety of protocol modules, and configuration modules. System information
is classified, filtered, and output according to source modules. You can use the info-center source ?
command to view the supported information source modules.

Default output rules of system information

The default output rules define the source modules allowed to output information on each output
destination, the output information type, and the output information level as shown in
following applies to all modules by default:
All log information is allowed to be output to the web interface; log information with severity level
•
equal to or higher than informational is allowed to be output to the log host; log information with
severity level equal to or higher than informational is allowed to be output to the console, monitor
terminal, and log buffer; log information is not allowed to be output to the trap buffer and the SNMP
module.
All trap information is allowed to be output to the console, monitor terminal, log host, web interface,;
•
trap information with severity level equal to or higher than informational is allowed to be output to
the trap buffer and SNMP module; trap information is not allowed to be output to the log buffer.
Default
Default output destination
channel name
console Console
monitor Monitor terminal
loghost Log host
trapbuffer Trap buffer
logbuffer Log buffer
snmpagent SNMP module
channel6 Web interface
channel7 Not specified
channel8 Not specified
channel9 Not specified
155
Description
Receives log, trap and debugging
information.
Receives log, trap and debugging
information, facilitating remote
maintenance.
Receives log, trap and debugging
information and information will be
stored in files for future retrieval.
Receives trap information, a buffer
inside the device for recording
information.
Receives log and debugging
information, a buffer inside the device
for recording information.
Receives trap information.
Receives log information.
Receives log, trap, and debugging
information.
Receives log, trap, and debugging
information.
Receives log, trap, and debugging
information.
Table 6. The