Displaying And Maintaining Traffic Mirroring; Traffic Mirroring Configuration Examples; Example For Mirroring Traffic To An Interface; Configuration Procedure - HP A3100-8 v2 EI Configuration Manual

Displaying and maintaining traffic mirroring

To do...
Display traffic behavior
configuration information
Display QoS policy configuration
information

Traffic mirroring configuration examples

Example for mirroring traffic to an interface

Network requirements
On the network as shown in
to Ethernet 1/0/1 of the switch. A data monitoring device is connected to Ethernet 1/0/2 of the switch.
Monitor and analyze packets sent by Host A on the data monitoring device.
Figure 50 Network diagram for configuring traffic mirroring to a port
Host A
192 . 168.0.1
Host
Host B

Configuration procedure

Configure the switch:
# Enter system view.
<Sysname> system-view
# Configure basic IPv4 ACL 2000 to match packets with the source IP address 192.168.0.1.
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 192.168.0.1 0
[Sysname-acl-basic-2000] quit
# Create class 1 and configure the class to use ACL 2000 for traffic classification.
[Sysname] traffic classifier 1
[Sysname-classifier-1] if-match acl 2000
[Sysname-classifier-1] quit
# Create behavior 1 and configure the action of mirroring traffic to Ethernet 1/0/2 in the traffic
behavior.
[Sysname] traffic behavior 1
[Sysname-behavior-1] mirror-to interface Ethernet 1/0/2
Use the command...
display traffic behavior
user-defined [ behavior-name ]
display qos policy user-defined
[ policy-name [ classifier
tcl-name ] ]
Figure 50, Host A (with IP address 192.168.0.1) and Host B are connected
Eth1/0/1 Eth1/0/2
Switch Server
146
Remarks
Available in any view
Available in any view