Outputting System Information By Source Module; Default Output Rules Of System Information - HP 5500 EI Series Configuration Manual

Table 2 Information channels and output destinations
Information
channel number
0
1
2
3
4
5
6
7
8
9

Outputting system information by source module

The system is composed of a variety of protocol modules, and configuration modules. You can classify,
filter, and output system information based on source modules. To view the supported source modules,
use the info-center source ? command.

Default output rules of system information

A default output rule specifies the system information source modules, information type, and severity
levels for an output destination.
settings:
All log information is output to the Web interface. Log information with a severity level of at least
•
informational is output to the log host, console, monitor terminal, and log buffer. Log information is
not output to the trap buffer or the SNMP module.
All trap information is output to the console, monitor terminal, log host, and Web interface. Trap
•
information with a severity level of at least informational is output to the trap buffer and SNMP
module. Trap information is not output to the log buffer.
All debug information is output to the console and monitor terminal. Debug information is not
•
output to the log host, trap buffer, log buffer, the SNMP module, or Web interface.
Default channel Default output
name destination
console Console
monitor Monitor terminal
loghost Log host
trapbuffer Trap buffer
logbuffer Log buffer
snmpagent SNMP module
channel6 Web interface
channel7 Not specified
channel8 Not specified
channel9 Not specified
Table 3 shows the default output rules. The following describes the default
Description
Receives log, trap and debug information.
Receives log, trap and debug information,
facilitating remote maintenance.
Receives log, trap and debug information and
information will be stored in files for future
retrieval.
Receives trap information, a buffer inside the
device for recording information.
Receives log information, a buffer inside the
device for recording information.
Receives trap information.
Receives log information.
Receives log, trap, and debug information.
Receives log, trap, and debug information.
Receives log, trap, and debug information.
38