Specifying The System Time Source; Enabling Displaying The Copyright Statement - HP 10500 Series Configuration Manual

Specifying the system time source

The entire device uses one clock. All MDCs on the device use the same system time.
You can do either of the following:
Configure the system time on the device, and perform this task to configure the device to use the
•
local time source.
Configure a time protocol on one MDC, and perform this task to configure the device to use the time
•
source of the MDC. For more information about how to configure a time protocol on one MDC, see
Network Management and Monitoring Configuration Guide.
Only the default MDC can act as the local time source because only the default MDC has a local
oscillator.
To specify the system time source:
Step
1. Enter system view.
2. Specify the system time
source.

Enabling displaying the copyright statement

When displaying the copyright statement is enabled, the device displays the copyright statement in the
following situations:
When a Telnet or SSH user logs in.
•
• After a console or modem dial-in user quits user view (the device automatically tries to restart the
console session).
The following is a sample copyright statement:
******************************************************************************
* Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
To enable displaying the copyright statement:
Step
1. Enter system view.
2. Enable displaying the
copyright statement.
Command
system-view
clock protocol { none | ntp
mdc mdc-id }
Command
system-view
copyright-info enable
159
Remarks
N/A
By default, the default MDC on the device
uses NTP to get the system time.
To use the time source of an MDC, make sure
the time protocol configured on the MDC is
the same as the time protocol specified for
this command.
Remarks
N/A
By default, this function is enabled.
*
*
*