Ethernet Statistics Group Configuration Example - HP A3100-8 v2 EI Configuration Manual

To do...
Display RMON prialarm
configuration information
Display RMON events
configuration information
Display log information for the
specified or all event entries.

Ethernet statistics group configuration example

Network requirements
As shown in
Server through Ethernet cables.
Configure the RMON Ethernet statistics table to gather incoming packet statistics for GigabitEthernet
1/0/1, so the administrator can view the incoming traffic status of the interface at any time.
Figure 38 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] rmon statistics 1 owner user1
The system gathers incoming packet statistics for GigabitEthernet 1/0/1. To view the statistics:
Execute the display command.
•
<Sysname> display rmon statistics Ethernet 1/0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : Ethernet1/0/1<ifIndex.3>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
Figure 38, Agent is connected to a configuration terminal through its console port and to
: 21657
: 56
: 0
: 0
Use the command...
display rmon prialarm
[ entry-number ] [ | { begin |
exclude | include }
regular-expression ]
display rmon event
[ entry-number ] [ | { begin |
exclude | include }
regular-expression ]
display rmon eventlog
[ entry-number ] [ | { begin |
exclude | include }
regular-expression ]
, etherStatsPkts
, etherStatsMulticastPkts : 34
, etherStatsOversizePkts
, etherStatsJabbers
100
Remarks
Available in any view
Available in any view
Available in any view
: 307
: 0
: 0