Outputting System Information By Source Module; Default Output Rules Of System Information - HP 6125G Configuration Manual

Information
channel number
3
4
5
6
7
8
9

Outputting system information by source module

The system is composed of a variety of protocol modules, and configuration modules. You can classify,
filter, and output system information based on source modules. To view the supported source modules,
use the info-center source ? command.

Default output rules of system information

A default output rule specifies the system information source modules, information type, and severity
levels for an output destination.
settings:
All log information is output to the Web interface. Log information with a severity level of at least
•
informational is output to the log host. Log information with a severity level of at least informational
is output to the console, monitor terminal, and log buffer. Log information is not allowed to be output
to the trap buffer or the SNMP module.
All trap information is output to the console, monitor terminal, log host, Web interface. Trap
•
information with a severity level of at least informational is output to the trap buffer and SNMP
module. Trap information is not output to the log buffer.
All debugging information is output to the console and monitor terminal. Debugging information is
•
not output to the log host, trap buffer, log buffer, the SNMP module, Web interface.
Table 3 Default output rules for different output destinations
Output
destination
Console
Monitor
terminal
Log host
Trap buffer
Default channel
name
trapbuffer
logbuffer
snmpagent
channel6
channel7
channel8
channel9
Table 3
LOG
Modules
Enabled/
allowed
disabled
default (all
Enabled
modules)
default (all
Enabled
modules)
default (all
Enabled
modules)
default (all
Disabled
modules)
Default output
Description
destination
Receives trap information, a buffer inside the
Trap buffer
device for recording information.
Receives log information, a buffer inside the
Log buffer
device for recording information.
SNMP module Receives trap information.
Web interface Receives log information.
Not specified Receives log, trap, and debugging information.
Not specified Receives log, trap, and debugging information.
Not specified Receives log, trap, and debugging information.
shows the default output rules. The following describes the default
TRAP
Enabled/
Severity
disabled
Informa-
Enabled
tional
Informa-
Enabled
tional
Informa-
Enabled
tional
Informa-
Enabled
tional
36
DEBUG
Enabled/
Severity
disabled
Debug Enabled
Debug Enabled
Debug Disabled
Informatio
Disabled
nal
Severity
Debug
Debug
Debug
Debug