× Bookmark added
Page of 189
Download Table of Contents TroubleshootingTroublesh..

HP A3100-8 v2 EI Configuration Manual: Configuring Snmpv1 Or Snmpv2c Basic Parameters

A3100 v2 switch series.
Hide thumbs

Advertisement

To do...
Configure system information for
the SNMP agent
Configure a local engine ID for an
SNMP entity
Create or update a MIB view
Configure an SNMP agent group
Convert the user-defined plain text
password to a cipher text
password
Add a user to the SNMPv3 group
Configure the maximum size (in
bytes) of SNMP packets for the
SNMP agent
CAUTION:
After you change the local engine ID, the existing SNMPv3 users become invalid, and you must re-create
the SNMPv3 users.
NOTE:
view-name oid-tree
Each
subtree masks multiple times, the last configuration takes effect. Except the four subtrees in the default MIB
view, you can create up to 16 unique MIB view records.

Configuring SNMPv1 or SNMPv2c basic parameters

Follow these steps to configure SNMPv1 and SNMPv2c basic parameters:
Use the command...
snmp-agent sys-info { contact
sys-contact | location sys-location
| version { all | { v1 | v2c |
v3 }* } }
snmp-agent local-engineid
engineid
snmp-agent mib-view { excluded |
included } view-name oid-tree
[ mask mask-value ]
snmp-agent group v3 group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number ]
snmp-agent calculate-password
plain-password mode { 3desmd5 |
3dessha | md5 | sha }
{ local-engineid |
specified-engineid engineid }
snmp-agent usm-user v3
user-name group-name [ [ cipher ]
authentication-mode { md5 | sha }
auth-password [ privacy-mode
{ 3des | aes128 | des56 }
priv-password ] ] [ acl acl-number ]
snmp-agent packet max-size
byte-count
pair represents a view record. If you specify the same record with different MIB
84
Remarks
Optional
By default, the contact information
is Hewlett-Packard Development
Company, L.P, the location
information is null, and the
protocol version is SNMPv1
SNMPv2c SNMPv3.
Optional
Company ID and device ID by
default.
Optional
By default, the MIB view
ViewDefault is predefined and its
OID is 1.
Required
Optional
Required
If the cipher keyword is specified,
the arguments auth-password and
priv-password are considered as
cipher text passwords.
Optional
1,500 bytes by default.

Advertisement

   Also See for HP A3100-8 v2 EI

   Related Manuals for HP A3100-8 v2 EI

Comments to this Manuals

Symbols: 0
Latest comments: