Installing The Dc Power Front Connection Adapter - Cisco NCS 4000 Series Hardware Installation

Installing the DC Power Front Connection Adapter

Step 3 Repeat these steps for the DC power modules.
Installing the DC Power Front Connection Adapter
If you have limited access to the back of the chassis, or limited space behind the chassis, you can use the DC
Power Front Connection Adapter. This DC adapter moves the DC power connections from the back of the
chassis to the front of the chassis. This may be desirable in ETSI rack installations.
Figure 19: DC Power Front Connection Adapter
Prerequisites
• If the rear to front power adapter is going to be used, then the sub assembly needs to be attached first to
• The Cisco NCS 4016 chassis should be completely removed from the packaging and installed in the
Required Tools and Equipment
• 6-inch, number-1 Phillips screwdriver
• One DC Power Front Connection Adapter (NCS4K-DC-FA, includes brackets)
• 3/8 Ratchet Wrench, 7/16 Socket, and a Torque Wrench
Steps
Hardware Installation Guide for Cisco NCS 4000 Series
36
the chassis and then both units installed in a rack or cabinet.
rack or cabinet.
Installing Power Components