Hardware Installation Guide For Cisco Ncs 4000 Series - Cisco NCS 4000 Series Hardware Installation

Removing a Line Card
The system can indicate a hardware failure if you do not follow proper procedures. Remove or install only
Caution
one LC at a time. Allow at least 30 seconds for the system to complete its tasks before removing or
installing another LC.
This procedure is traffic-impacting.
Required Tools and Equipment
• ESD-preventive wrist strap
• Number-2 Phillips screwdriver or number-2 common (flat-head) screwdriver
Steps

Hardware Installation Guide for Cisco NCS 4000 Series

98
Removing and Replacing Chassis Components