Connecting Power To The Chassis; Connecting Power To An Ac-Powered Chassis - Cisco NCS 4000 Series Hardware Installation

Installing Power Components

Connecting Power to the Chassis

Step 7 Connect the power cables coming from batteries or from the PDU unit to the DC adapter terminal blocks on
the front side of the unit . See the Connecting Power to the Chassis, on page 43.
Figure 26: Connecting Power Cables to Terminal Blocks
1 Terminal Blocks
Connecting Power to the Chassis
Use one of the following procedures to connect power to your chassis:

Connecting Power to an AC-Powered Chassis

Follow these steps to connect the AC power cords to the chassis.
Hardware Installation Guide for Cisco NCS 4000 Series
43