Connecting Power To The Chassis - Cisco NCS 4000 Series Hardware Installation

Connecting Power to the Chassis

Step 7 Connect the power cables coming from batteries or from the PDU unit to the DC adapter terminal blocks on
the front side of the unit . See the
Figure 101: Connecting Power Cables to Terminal Blocks
1

Connecting Power to the Chassis

Use one of the following procedures to connect power to your chassis:
Connecting Power to an AC-Powered Chassis
Follow these steps to connect the AC power cords to the chassis.
Hardware Installation Guide for Cisco NCS 4000 Series
184
Connecting Power to the Chassis, on page
Terminal Blocks
Installing Power Components
184.