Cisco NCS 4000 Series Hardware Installation page 233

Installing Route Processor Cards, Fabric Cards, and Line Cards
This figure shows the details of the front panel of the NCS4K-4H-OPW-QC2 line card.
Figure 111: Front Panel of the NCS4K-4H-OPW-QC2 Line Card
1 Red ejector
3 Attention LED
5 QSFP+ port
7 Blue ejector
Table 30: NCS4K-4H-OPW-QC2 Line Card Descriptions
LED
Status
2 Status LED
4 CFP2 (DWDM) port
6 QSFP+ or QSFP 28 port
State
Green
Yellow
Off
Hardware Installation Guide for Cisco NCS 4000 Series
NCS4K-4H-OPW-QC2 Line Card
Description
The LC is properly seated and
operating correctly.
The LC has one or more errors
detected.
No power is applied to the LC.
213