Pluggable Optics Support - Cisco NCS 4000 Series Hardware Installation

Pluggable Optics Support

LED
Attention
Port
17 The Attention LED can be lit only by using the hw-module attention-led location CLI command, which is useful for identifying and verifying which card needs
attention.
Physical Characteristics
• Height—11.05 in. (280.6 mm)
• Width—1.55 in. (39.4 mm)
• Depth—14.25 in. (362 mm)
• Weight—7.8 lb (3.53 kg)
Pluggable Optics Support
The following table describes the pluggable optics supported on the line cards.
Hardware Installation Guide for Cisco NCS 4000 Series
222
State
17
Blue
Off
Green
Yellow
Off
Installing Route Processor Cards, Fabric Cards, and Line Cards
Description
The card needs attention.
The card does not need attention.
The link is up (including internal
loopback).
The link is down or a hardware
failure has occurred.
The slice is unprovisioned by
software, the optics module is
missing, or the slice has been
powered down.