Hardware Installation Guide For Cisco Ncs 4000 Series - Cisco NCS 4000 Series Hardware Installation

Removing and Replacing Chassis Components
The following steps describe how to remove an LC.
Figure 47: Removing an LC
Procedure
Step 1 Attach the ESD-preventive wrist strap to your wrist and connect its leash to the ESD jack located on the front
or rear side of the chassis. You can also connect the ESD-preventive wrist strap leash to any bare metal surface
on the chassis.
Step 2 Identify the card to be removed.

Hardware Installation Guide for Cisco NCS 4000 Series

Removing a Line Card
99