Installing The Chassis Ground Cable - Cisco NCS 4000 Series Hardware Installation

Installing the Chassis Ground Cable

1
3
To ensure a satisfactory supplemental ground connection to the chassis, use the following parts:
• One grounding lug, which has #10 stud holes with 5/8 spacing between them, and a wire receptacle able
• Two M6 round-head screws and two locking washers.
• One grounding wire. Although we recommend at least 6-AWG multistrand copper wire, the wire diameter
Installing the Chassis Ground Cable
This section describes how to install a ground cable to either NEBS bonding and grounding point on the front
or side of the Cisco NCS 4000 FCC.
Required Tools and Equipment
• Ground lug and screws (provided in chassis accessory kit)
• Ground cable
• Crimping tool and lug specific die
Hardware Installation Guide for Cisco NCS 4000 Series
30
Screws
Grounding point in front of the chassis
to accept a 6-AWG or larger, multistrand copper wire. This lug is similar to those used for the DC input
power supply leads.
and length depend on your chassis location and site environment.
Installing Power Components
2 Grounding lug with cable
Grounding point on left side of the chassis