Hardware Installation Guide For Cisco Ncs 4000 Series - Cisco NCS 4000 Series Hardware Installation

Installing Route Processor Cards, Fabric Cards, and Line Cards
OTU1 and OTU2 ports support generic forward error correction (GFEC). The card supports up to 2-level
ODU4, ODU3, ODU2, ODU1, ODU0, and ODUFlex switching functions by interconnecting with the
centralized agnostic switch fabric.
The line card also supports direct interconnection to other slots within the Cisco NCS 4016 chassis to
interconnect switched OTN traffic directly to the NCS 4000 2 x 100G CP-DQPSK - Full C band Tunable
DWDM line card.
This figure shows the details of the front panel of the 20-port 10GE OTN LC and LEDs.
Figure 38: 20-Port 10GE OTN LC Front Panel and LEDs
1
2
Status LED
Attention LED
3 Port LEDs (one LED on each port)

Hardware Installation Guide for Cisco NCS 4000 Series

20-Port 10GE OTN Line Card
6
79