Hardware Installation Guide For Cisco Ncs 4000 Series - Cisco NCS 4000 Series Hardware Installation

Installing Route Processor Cards, Fabric Cards, and Line Cards
The card supports up to two-level ODU4, ODU3, ODU2, ODU1, ODU0, and ODUFlex nested switching
functions by interconnecting with the centralized agnostic switch fabric; 100-Gigabit Ethernet signals are
mapped using generic mapping procedure (GMP) over ODU4 according to ITU-T G.709 v3 (Section 17.7.5).
This figure shows the details of the front panel of the 2-port 100GE OTN LC and LEDs.
Figure 39: 2-Port 100GE OTN LC Front Panel and LEDs
1
2
Status LED
Attention LED
3 Port LEDs (one LED on each port)

Hardware Installation Guide for Cisco NCS 4000 Series

2-Port 100GE OTN Line Card
81