Xstatus Video Layout Site [1; Xstatus Video Output Hdmi [1, 2] Connected; Xstatus Video Output Hdmi [1, 2] Resolution Refreshrate; Xstatus Video Layout - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus Video Output HDMI [1, 2] Resolution RefreshRate

Shows the resolution refresh rate (Hz) for the video output HDMI.
Value space of the result returned:
<1..300>
Example:
xStatus Video Output HDMI 1 Resolution RefreshRate
*s Video Output HDMI 1 Resolution RefreshRate: 60
** end

xStatus Video Output HDMI [1, 2] Connected

Indicates whether a display is connected to the HDMI video output or not. NOTE: When a display
enters standby mode, the endpoint may not be able to detect it. The connector status will then
return False/Unknown even if the display is physically connected.
True - A display is connected to the video output connector.
False - No display is connected to the video output.
Value space of the result returned:
<True/False>
Example:
xStatus Video Output HDMI Connected
*s Video Output HDMI 1 Connected: False
** end

xStatus Video Layout

Shows the top level overview of the video layout status.

xStatus Video Layout Mode

Indicates type of layout currently used by the codec, custom or default.
Value space of the result returned:
<Default/Custom>
Example:
xStatus Video Layout Mode
*s Video Layout Mode: Default
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration

xStatus Video Layout PresentationView

xStatus Video Layout Site [1..n] Output [1..2] FamilyName
xStatus Video Layout Site [1..n] Output [1..2] FullFamilyName
173
xCommand
Returns information about the presentation view mode.
Value space of the result returned:
<Default/Maximized/Minimized>
Example:
xStatus Video Layout PresentationView
*s Video Layout PresentationView: "Default"
** end
Shows the name of the video layout family.
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 FamilyName
*s Video Layout Site 1 Output 1 FamilyName: "fullscreen"
** end
Shows the name, included information about self-view on/off, for the video layout family.
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 FullFamilyName
*s Video Layout Site 1 Output 1 FullFamilyName: "fullscreen-local-single-
camctrl"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.