Presentation Commands; Xcommand Presentation Start; Xcommand Presentation Stop; Provisioning Commands - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Presentation commands

xCommand Presentation Start

Open a media stream from the selected presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Start [PresentationSource: PresentationSource]
[SendingMode: SendingMode] [ConnectorId: ConnectorId] [Instance: Instance]
where
PresentationSource
: Integer (1..2)
Select the video input source to be used for presentation, identified by source number.
SendingMode
: LocalRemote/LocalOnly
Select whether the presentation is shown locally or locally and remotely. The default
value is LocalRemote.
ConnectorId
: Integer (1..2)
Select the video input source to be used for presentation, identified by connectorId.
Instance
: New/1/2/3/4/5/6
Select which local presentation instance you wish to start.

xCommand Presentation Stop

Stop the media stream from the presentation source.
Requires user role: ADMIN, USER
USAGE:
xCommand Presentation Stop [Instance: Instance] [PresentationSource:
PresentationSource]
where
Instance
: 1/2/3/4/5/6
Select which local presentation you wish to stop, identified by presentation instance.
PresentationSource
: Integer (1..2)
Select which local presentation you wish to stop, identified by source number.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

Provisioning commands

xCommand Provisioning CompleteUpgrade

Starts installing the software upgrade if you wish to install it before it is set to do so.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning CompleteUpgrade

xCommand Provisioning PostponeUpgrade

Postpones the installing of the software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning PostponeUpgrade SecondsToPostpone:
where
SecondsToPostpone
: Integer (0..65534)
Set how long to postpone the upgrade. The value is in seconds.

xCommand Provisioning StartUpgrade

The codec software can be upgraded from the provisioning server. When starting the upgrade
the software is automatically downloaded and installed. The codec reboots to complete the
software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning StartUpgrade
118
API Reference Guide
xStatus Appendices
SecondsToPostpone
Copyright © 2017 Cisco Systems, Inc. All rights reserved.