Audio Commands; Xcommand Audio Diagnostics Measuredelay; Xcommand Audio Microphones Mute; Xcommand Audio Microphones Togglemute - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

Audio commands

xCommand Audio Diagnostics MeasureDelay

This command will measure the audio delay/latency in a device connected to the video system.
A typical use case it to measure the delay in a TV connected to the video system via the HDMI
connector. If the delay in a TV is too high, the real-time experience of a video call will be
substantially degraded. If the delay is more than 50 ms we recommend the user to find a TV
setting that has shorter delay. Typical TV settings that can reduce the delay are: Gaming Mode
and PC Mode.
This command will measure the delay between output and input (microphone). This means
that if you are using an external acoustic echo canceller or audio mixer, this command will also
measure the delay of these devices.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Diagnostics MeasureDelay [MeasurementLength: MeasurementLength]
[Output: Output] [Volume: Volume]
where
MeasurementLength
: Integer (1..100)
The length of the measurement in number of seconds. In a noisy environment a longer
measurement time will give a more reliable and robust result. The default is set to 6.
Output
: HDMI/Line/Internal/All
HDMI: Measure the delay of the device connected to the HDMI output.
Line: Measure the delay of the device connected to the Line output (only available on
video systems that have a Line output).
Internal: Measure the delay of the internal loudspeaker (only available on video systems
that have an internal loudspeaker).
All: Will measure the maximum delay of all outputs.
The default is set to HDMI.
Volume
: Integer (1..50)
The volume for the test signal. In a noisy environment a higher volume gives more
reliable and robust results. The default is set to 20.
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration xCommand xCommand

xCommand Audio Microphones Mute

Mute all microphones.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Audio Microphones Mute

xCommand Audio Microphones ToggleMute

Toggle the microphone between muted and unmuted.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Audio Microphones ToggleMute

xCommand Audio Microphones Unmute

Unmute all microphones.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand Audio Microphones Unmute

xCommand Audio Select

Select which type of audio device to use (built-in loudspeakers and microphone, headsets, or
handset).
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Select Device:
where
Device
: Internal/HeadsetBluetooth/HeadsetAnalog/HeadsetUSB/HandsetUSB
Choose whether to use the built-in loudspeakers and microphone (internal), a Bluetooth
headset, an analog headset (DX70 only), a USB headset, or a USB handset.
95
API Reference Guide
xStatus Appendices
Device
Copyright © 2017 Cisco Systems, Inc. All rights reserved.