Appendix 1.1 G(P).Offgan - Mitsubishi Electric Q66DA-G User Manual

APPENDICES

Appendix 1.1 G(P).OFFGAN

Switches the mode of the Q66DA-G. (Normal mode to offset/gain setting mode, offset/gain
setting mode to normal mode)
Internal device
(System, user)
Setting
data
Bit Word
(S) —
[Instruction [Execution
symbol] condition]
G.OFFGAN
GP.OFFGAN
Setting
data
Un Start I/O number of the module
Mode switching
0: Switching to normal mode
(S) 1: Switching to offset/gain setting mode
The setting of any other value results in "switching to offset/gain setting
mode".
(1) Function
Link direct device
J \
File
register
Bit
Command
Command
Setting data
Description
Switches the mode of the Q66DA-G.
• Normal mode to offset/gain setting mode (Offset/gain setting mode flag (XA)
turns on.)
• Offset/gain setting mode to normal mode (Offset/gain setting mode flag (XA)
turns off.)
(1) When the offset/gain setting mode is switched to the normal mode, Module
READY (X0) turns from off to on.
Note that initial setting processing will be executed if there is a sequence pro-
gram that makes initial setting when Module READY (X0) turns on.
(2) D/A conversion is discontinued if the mode is switched (from the normal mode
to the offset/gain setting mode or from the offset/gain setting mode to the nor-
mal mode).
To resume D/A conversion, switch to the normal mode and then turn on Oper-
ating condition setting request (Y9).
Appendix 1 Dedicated Instruction List and Available Devices
Usable devices
Intelli-
gent func-
Index
tion
register
module
Word Z
device
U \G
—
G.OFFGAN
GP.OFFGAN
Setting range
0 to FE
Appendix 1.1 G(P).OFFGAN
Constant
Others
K, H $
— —
Un ( S)
Un ( S)
Data type
Binary 16 bits
H
0, 1 Binary 16 bits
App
—
- 2