4
SETUP AND PROCEDURES BEFORE OPERATION
4.4.3
Connector/terminal block converter module
For the following products, please consult your local Mitsubishi Electric sales office or rep-
resentative.
Dedicated cable
Connector/terminal block con-
verter module
Product
*1
shows the cable length (05: 0.5m, 10: 1.0m, 20: 2.0m, 30: 3.0m).
The offset/gain setting is adjusted in the Q66DA-G at the industrial shipment set-
ting of the module.
Therefore an error may occur for the conversion characteristic because of the
influence such as the conductor resistance when a dedicated cable or connector/
terminal block converter module is used.
If a problem occurs by the influence, perform the offset/gain setting by using the
user range setting. (Refer to Section 4.6.)
4.4.3 Connector/terminal block converter module
Model
*1
FA-CBL
Q66DAG
Mitsubishi Electric Engineering Co.,
FA1-TBS40DAG
Ltd.
FA-LTB40DAG
Manufacturer
4
4.4 Wiring
- 8
1
2
3
4
5
6
7
8