Usage Of Fb; Outline - Mitsubishi Electric Q66DA-G User Manual

5
UTILITY PACKAGE (GX Configurator-DA)
5.8

Usage of FB

This section describes the procedure for using FB with GX Developer.
Refer to the "GX Developer Version 8 Operating Manual (Function Block)" for details.
5.8.1

Outline

The procedure for creating FB is shown below.
Next, a flowchart of procedures 1) to 4) is shown below.
GX Configurator-DA
GX Developer
1) Set up the intelligent function module parameter (initial setting/auto refresh
setting).
2) Convert the intelligent function module parameter into FB.
3) Paste the FB to a sequence program.
4) Convert (compile) the sequence program.
1)
Set up the initial setting/auto refresh setting.
2)
Convert the parameter into FB.
3)
Paste the FB to a sequence program.
4)
Convert (compile) the sequence program.
Start
End
5.8 Usage of FB
Refer to sections 5.4 and 5.5.
Refer to sections 5.7.
Refer to sections 5.8.2.
Refer to sections 5.8.3.
5
- 31
5.8.1 Outline
1
2
3
4
5
6
7
8