Programming Example Without Using The Utility Package - Mitsubishi Electric Q66DA-G User Manual

6
PROGRAMMING
6.2.3
(1) List of devices
6
- 8 6.2 For Use in Normal System Configuration

6.2.3 Programming example without using the utility package

Programming example without using the utility package
Device
M0 Module READY check flag
M20,M21
CH1 Warning output flag
M22,M23 CH2 Warning output flag
X0 Module READY
X7 External power supply READY
X9 Operating condition setting completed flag
XE Warning output signal
XF Error flag
Y1 CH1 Output enable/disable flag
Y2 CH2 Output enable/disable flag
Y9 Operating condition setting request
YE Warning output clear request
YF Error clear request
X11 Output enable
X12 Digital value write signal
X14 Warning output reset signal
X15 Error code reset signal
Y20 to Y2B Error code display (BCD 3 digits)
*1 Although channel 1 does not use warning output, these devices are assigned to read out data of
Warning output flag of both channel 1 and 2 at a time.
Function
*1
Q66DA-G
(X/Y0 to X/YF)
QX10 (X10 to X1F)
QY10 (Y20 to Y2F)