7
ONLINE MODULE CHANGE
(5) Resumption of control
7.3.4 When user range setting is used and initial setting was made with GX Configurator-DA (other system
(g) Turn on Output enable/disable flag (Y1 to Y6) of the used channel and check
whether proper conversion has been made or not.
(Be careful since corresponding analog signals will be actually output.)
(a) After choosing [Diagnostics] - [Online module change] in GX Developer to
redisplay the "Online module change" dialog box, click the [Execution] button to
resume control. Module READY (X0) will be turned on.
(b) A message, "Online module change completed" appears.
7.3 Online Module Change Procedure
1
2
3
4
5
6
7
8
7
- 25