Mitsubishi Electric Q66DA-G User Manual page 102

5
UTILITY PACKAGE (GX Configurator-DA)
(3) Command button
5
- 26 5.6 Monitoring/Test
5.6.3 Confirmation of Conversion Characteristic
Analog/digital conversion: Select a conversion type shown below for confirming
Analog value:
Digital value:
• The offset value is the analog output value (voltage or current) when a
digital entry value of 0 is set from the programmable controller CPU.
• The gain value is the analog value (voltage or current) output when the
digital input value set from the programmable controller CPU is as fol-
lows:
Normal resolution mode
High resolution mode
the correspondence between an analog value and a
digital value caused by the conversion characteristic.
•Digital Analog
•Analog Digital
<When converted to a digital value>
Enter an analog value to be converted to a digital value
<When converted to an analog value>
The analog value converted from a digital value is dis-
played.
<When converted to a digital value>
The digital value corresponding to an entered analog
value is displayed.
<When converted to an analog value>
Enter a digital value to be converted to an analog value.
4000 (User range setting 1 to 3)
12000 (User range setting 1 to 3)
The entered offset/gain value is determined, and the I/O
characteristic diagram is updated.
Conversion for the entered value is performed.